Question 1

What is the difference between wax and a ceramic coating?

Accepted Answer

Wax sits on top of the surface and gives short-term gloss and protection that wears off with sun, salt, and washing. A ceramic coating bonds to a properly prepared surface, giving a harder, slicker layer that improves water beading, gloss, and ease of cleaning for much longer than wax. Neither one fixes oxidation or scratches on its own, which is why the surface is usually corrected first.

Question 2

Does paint or gel coat need correction before protection is installed?

Accepted Answer

Usually, yes. Ceramic coatings and protection film lock in whatever finish is underneath, including oxidation, swirls, and scratches. We inspect the surface first and recommend correction only where it is needed so the protection goes over a clean, refined finish.

Question 3

How should I maintain my boat or vehicle after service?

Accepted Answer

Rinse off salt and contamination regularly, wash with a pH-neutral, marine-safe or automotive-safe soap, and use clean microfiber. Avoid harsh cleaners, abrasive pads, and automatic brush washes on coated surfaces. We give specific care guidance after each service, and recurring maintenance washes are available.

Question 4

Does a ceramic coating eliminate the need to wash a boat?

Accepted Answer

No. A ceramic coating makes washing faster and helps dirt, salt, and water release more easily, but the boat still needs regular washing. Keeping the coating clean is what lets it keep performing.

Question 5

Can you repair small fiberglass, paint, or gel coat chips?

Accepted Answer

Yes. Small chips, localized scratches, and minor cosmetic damage are a regular part of our work. Repairs are filled, shaped, wet sanded, and buffed to blend with the surrounding finish. How closely a repair matches depends on the age and condition of the original color, which we discuss after seeing it.

Question 6

Can fiberglass damage be repaired without repainting the entire boat?

Accepted Answer

In many cases, yes. Localized damage can often be repaired and blended in the affected area only. Larger or widespread damage, or a finish that is heavily faded, may be better served by refinishing a larger section. We recommend the right approach after an inspection.

Question 7

Does Startt Detailing handle complete boat restoration projects?

Accepted Answer

Yes. Restoration projects can combine fiberglass repair, finish correction, repainting, detailing, and protection based on what the vessel needs. Each project is planned after an inspection rather than sold as a fixed package.

Question 8

Do you offer full boat repainting?

Accepted Answer

Yes. We evaluate boats that need a larger finish transformation or a full repaint. Scope, materials, and timing depend on the boat, so we discuss the details once we have seen it in person or through photos.

Question 9

How is Yacht Armor different from a ceramic coating?

Accepted Answer

A ceramic coating is a thin bonded layer that improves gloss, water behavior, and ease of cleaning. Yacht Armor is a physical film applied over selected surfaces, adding a barrier that helps absorb light scuffs, abrasion, and dock rash. Some owners use both: film on high-contact areas and ceramic elsewhere.

Question 10

What areas of a boat can Yacht Armor protect?

Accepted Answer

Yacht Armor is commonly used on high-exposure and high-contact areas such as hull sides, painted surfaces, outboard cowlings, and selected interior finishes or displays. Not every surface or material is a good candidate, so final suitability is decided after we inspect the boat.

Question 11

Does Yacht Armor change the appearance of the boat?

Accepted Answer

Yacht Armor is a low-profile film designed to preserve the visible finish. On a properly prepared surface it is intended to be hard to notice. The condition of the surface underneath matters, which is why correction is often done first.

Question 12

Do you offer ceramic coatings for vehicles?

Accepted Answer

Yes. Automotive ceramic coatings are a dedicated premium service. The process includes inspection, wash and decontamination, paint evaluation, correction when appropriate, coating application, and a final inspection with care guidance.

Question 13

Is Startt Detailing mobile?

Accepted Answer

Yes. We provide mobile marine service at marinas, slips, lifts, storage yards, and driveways, and mobile service for vehicles and fleets. Some larger repair or restoration projects may need specific conditions, which we plan for together.

Question 14

What areas do you serve?

Accepted Answer

We serve Delaware and Maryland coastal communities, including Sussex County, Rehoboth Beach, Lewes, Bethany Beach, Fenwick Island, Ocean City MD, the Delaware beaches, and nearby coastal marinas. If you are just outside these areas, ask anyway.

Question 15

What information should I send when requesting a quote?

Accepted Answer

Send the boat or vehicle make and model, year, boat length if applicable, where it is located, its current condition or damage, and what you would like done. Photos help a lot. You can text them to (302) 943-0217 after starting the conversation.

Common questions, clear answers.

Protection Options

Marine Detailing

Fiberglass and Restoration

Yacht Armor

Automotive Protection

Scheduling and Service Areas

Still have a question?